Pump Plunger Assemblies
GARDNER DENVER WELCH VACUUM TECH INC REBUILD KIT WELCH 2522 PUMP
NC1526419 REBUILD KIT WELCH 2522 PUMP
Azzota Corp Dispensing Nozzles & Feeding Tube Sinkers (Stainless Steel) #15
Dispensing Nozzles & Feeding Tube Sinkers (Stainless Steel) #15
Azzota Corp Dispensing Nozzles & Feeding Tube Sinkers (Stainless Steel) #16
Dispensing Nozzles & Feeding Tube Sinkers (Stainless Steel) #16
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Easy-Load Pump Head Mounting Hardware, Mounts Four Pump Head, Stainless Steel; 2/Set
This mounting hardware is designed to make the Masterflex L/S series pump head flexible for a wide range of applications. Choose from different material or increase the number of pump heads on a L/S drive with mounting hardware. This hardware is compatible with the Masterflex L/S series peristaltic drives.
Bellco Glass, Inc. 10 Hole Large Flange Headplate for Omni Vessels
200mm large flange headplate 10-port6@ 1/4" OD4@ 1/2" OD1 center for drive motor1964-90115 1/4" compression fitting1964-90120 1/2" compression fitting1964-90125 5/16" compression fitting (thermowell)Headplates are used with the large flange vessels to seal and to also provide ports for access to the interior of the vessel. The 18-port headplate is most used since more components can be fitted into its ports. The impeller is always positioned in the center drive port and a variety of components i.e. probe (1/2"), harvesting tubes (1/4" or 1/2"), thermowells (5/16") can be added as needed. Headplates and all stainless components of the bioreactor systems are electropolished to seal the surface against bacterial contamination that might occur with a rough surface. MADE IN THE USA. O-ring replacements: a554-30 6 eacha554-42 4 eacha554-13 1 each
Electron Microscopy Sciences Vacuum Pump Exhaust Filter including adapter
Vacuum pump exhaust filters for vacuum rotary vane pumps remove all visible oil mist and smoke from vacuum pump exhaust, even when it is saturated with oil. The high efficiency filter cartridge continuously drains the collected liquid, allowing recovery of expensive lubricating fluid. Filters are for pumps with flow ratings ranging of 3 cfm in non-hazardous/non-corrosive applications. Port size is 1/2" NPT.
The filter eliminate 99% oil mist and smoke from vacuum pump exhaust and prevents oil accumulation in ductwork. Expensive lubricating oils is automatically returned to pump. Using the filter will eliminate potential OSHA and EPA violations.
Specifications
Maximum Flow Rate: 3 CFM.
Material: Nylon. Maximum Seals: None.
Maximum Temperature: 121 C.
Shipping Pressure: 15PSIG.
Dimensions: 2" Dia. x 3.7" H.
Weight: .25lbs (0.1kg).
Electron Microscopy Sciences Vacuum Pump Exhaust Filter, no adapter
Vacuum pump exhaust filters for vacuum rotary vane pumps remove all visible oil mist and smoke from vacuum pump exhaust, even when it is saturated with oil. The high efficiency filter cartridge continuously drains the collected liquid, allowing recovery of expensive lubricating fluid. Filters are for pumps with flow ratings ranging of 3 cfm in non-hazardous/non-corrosive applications. Port size is 1/2" NPT.
The filter eliminate 99% oil mist and smoke from vacuum pump exhaust and prevents oil accumulation in ductwork. Expensive lubricating oils is automatically returned to pump. Using the filter will eliminate potential OSHA and EPA violations.
Specifications
Maximum Flow Rate: 3 CFM.
Material: Nylon. Maximum Seals: None.
Maximum Temperature: 121 C.
Shipping Pressure: 15PSIG.
Dimensions: 2" Dia. x 3.7" H.
Weight: .25lbs (0.1kg).
Electron Microscopy Sciences Edwards EMF 10 Replacement Mist Element
Replacement part for the EMF10 oil mist filter. The EMF10 is used with the Edwards RV3, RV5, and RV8 vacuum pumps.
